Building Modern Console Table
Modern console table – In addition to its aesthetically pleasing, building a console table on its own can save hundreds of crowns of what you would have paid at a furniture store. While the process may seem extremely difficult, it is actually quite simple if you follow proper instructions.
12 Photos Gallery of: Building Modern Console Table
Take four 28 “pieces of 2×4 wood and cut piece of MDF wood into a 15” X48 “piece with a circular saw. Use a pen to draw a few marks on the 1 1/2” corners from the long side. Marks should be made to a 2 1/2 “and 3 3/4” in from that point too. Drill holes on all these points. Stand the modern console table top so that the driver’s holes are facing you at the same time about an additional piece of MDF on the floor next to it. Secure two screw holes to secure the first leg to the table top. Continue until all four the legs have been stuck.
Cut two 2×4 “wood pieces at 10 1/8” long and another two at 41 3/4 “long to serve as support beams for the modern console table. Slide one of the 10 1/8″ pieces into one of the shorter sides of the desk between two of the legs. Drill two holes in the leg insert and screw this piece of wood between them. Repeat this step for the other side of the table. Place a 41 3/4 “piece of wood between the two pieces of wood you are attached. Drill two holes on both sides and screw them into the table. Repeat this step for all commands. Add a layer of bite or color as desired.Tag: long modern console table, low console table modern